The present set-up is a self-contained, water re-circulating unit provided with a top tray and a sump tank. Various hydraulics experiments can be conducted on this set-up. A FHP Centrifugal Pump is fitted for water circulation. Flow control valve and bypass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch. Water collected on the top tray from experimental set-up, drains and return to sump tank
➢Various experiments can be carried out with common basic table, with separate experimental set-ups (supplied at extra cost), which can be connected to hydraulic bench with flexible pipe
➢Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts.
➢Water Supply (Initial Fill).
➢ Floor Drain. Floor Area: 1.5 x 1.5 m
➢Top Tray : Size 1000 x 700 x 100 mm (approx.)
➢Water Circulation : 1 HP Pump, Crompton/Standard make.
➢Flow Measurement : Using Measuring Tank, Capacity 40 Ltrs.
➢Sump Tank : Capacity 100 Ltrs.
➢Stop Watch : Electronic.
➢Pressure measurement : By Differential water manometer
➢Control Panel Comprises of : Standard make On/Off Switch, Mains Indicator, etc.
➢Tanks and Top Tray will be made of Stainless Steel.
➢An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
➢The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.
➢Bernoulli's Theorem Apparatus
➢Flow through Orifice and Mouth Piece
➢Flow over Notches Impact of Jet on Vanes
➢Losses due to Friction in Pipe Line
➢Losses in Pipe Fittings, Sudden enlargement & Contraction
➢Venturimeter & Orifice meter
➢Reynolds's Apparatus
➢Pitot Tube Setup
➢Metacentre Height Apparatus
➢ Study of Pressure Measurement
➢Pelton wheel Turbine Demonstration